AT9100 Bell
6W 70mm Cutout Fire Rated adjustable lensed LED downlight w/white trim
- Dual-power selectable, up to 800 lumens output
- Quad-CCT selectable with 60 degree beam angle
- White trim colour
- Tilt adjustable lens up to 25 degrees
- Fire rating FRL 60/60/60 or _/60/60 + RISF 60 in accordance with AS 1530.4:2014.
- Simulated ceiling fire resistance test of Horizontal separating elements – Section 4-4.1.2 Part (b) Floor-ceiling system
- And 4.1.2 Part (f) Resistance to the incipient spread of fire
- Assessment of site suitability recommended by accredited person (Fire Assessor/Certifier/Engineer) prior to purchase
SKU:
AT9100 Bell
Category: Fire Rated
Specifications
Efficiencies
| Total System Efficiency | 125 lm/W |
|---|---|
| The performance of each component of a luminaire is demonstrated through its efficiencies, which together determine the total system efficiency of the product. The output of the LED chip is first multiplied by the optical and thermal efficiencies to calculate the Luminaire efficiency. However, this calculation does not consider the driver efficiency. To determine the overall efficiency of the system, the Luminaire efficiency must be multiplied by the driver efficiency, which accounts for all losses in the system. | |
Mechanical
| IP Rating | IP65 Front Face Only |
|---|---|
| IC Rating | IC-4 |
| IC-4 rating has been conducted at the products maximum working Temperature Range (C) in line with Australian standards. This provides the required safety when covered with insulation and used in Australian Environments. | |
| Adjustability | Adjustable |
| Fitting Colour | White |
| Product Finish | White |
| Body Material | Powdercoated Steel |
| Diffuser Material | Polycarbonate |
| Installation Type | Recessed |
Electrical
| Working Temp Range | -20 to 45 °C |
|---|---|
| Input Frequency | 50 Hz |
| Maximum Wattage | 6 W |
| System Max Wattage | 6 W |
| Input voltage | 220-240V~ |
| Power Selection | 4/6 W |
Lamp
| Colour Rendering Index (CRI) | >80 |
|---|---|
| LED Type | Diffused |
| CCT Configuration | QUAD-CCT |
| Beam Angle | 60 ° |
LED Lifetime
| LED Lifetime Ratings (Failure rate & lumen depreciation) | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. | |||||||
| TM-21 Test Hours | 10000 hrs | ||||||
Colour temperature
| 4 Watts | |
|---|---|
| Soft White (2700 K) | 500 lm |
| Warm White (3000 K) | 515 lm |
| Cool White (4000 K) | 530 lm |
| DayLight (5700 K) | 520 lm |
| 6 Watts | |
| Soft White (2700 K) | 720 lm |
| Warm White (3000 K) | 740 lm |
| Cool White (4000 K) | 800 lm |
| DayLight (5700 K) | 760 lm |
Driver
| Driver Type | Dimmable ( Phase cut) |
|---|---|
| Driver Included | Yes |
| Integrated Driver | No |
| Dimmable | Yes |
| Wiring Type | Non rewireable Flex & Plug |
Compliance
| Standards |
|
|---|
Warranty
| Warranty | 5 Year Warranty, First 2 Years Onsite |
|---|---|
| The total warranty period is shown above. Where an on-site period is listed, the first years are covered on-site, with return-to-base coverage for the remainder. For full warranty details and claim instructions, please refer to our Warranty page. | |
| Domestic Use Warranty | 3 RTB (Total 3 Years) |
Dimensions
| Product Height | 50 mm |
|---|---|
| Cutout | 68-75 mm |
| Product Diameter | 85 mm |
AT9100/ADJ/WH


Ordering Information
| Order code | Item code | Description | Availability | |
|---|---|---|---|---|
| 11640 | AT9100/ADJ/WH | Bell 6W 70mm Cutout Fire Rated adjustable lensed LED downlight w/white trim |
Documents & Downloads
*Auto generated datasheet (beta)
Photometrics
AT9100ADJWH/2700K/4W


AT9100ADJWH/2700K/6W


AT9100ADJWH/3000K/4W


AT9100ADJWH/3000K/6W


AT9100ADJWH/4000K/4W


AT9100ADJWH/4000K/6W


AT9100ADJWH/5700K/4W


AT9100ADJWH/5700K/6W



