Mechanical
| Adjustability | Fixed |
|---|---|
| Body Material | Polycarbonate |
| Product Finish | Plastic |
| Fitting Colour | |
| AT3014/12/LED/SIL/CW AT3014/18/LED/SIL/CW AT3014/18/LED/SIL/WW AT3014/25/LED/SIL/CW | Silver |
| AT3014/12/LED/WH/CW AT3014/12/LED/WH/WW AT3014/18/LED/WH/CW AT3014/18/LED/WH/WW AT3014/25/LED/WH/CW AT3014/25/LED/WH/WW | White |
| IC Rating | Non-IC |
| Installation Type | Wall or Ceiling |
| IP Rating | IP54 |
Electrical
| Electrical Rating (Class) | 2 |
|---|---|
| Input Frequency (Hz) | 50 |
| Input voltage | 230Vac |
| In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% | |
| Switch Type | Inline |
| System Max Wattage (W) | |
| AT3014/12/LED/SIL/CW AT3014/12/LED/WH/CW AT3014/12/LED/WH/WW | 12 |
| AT3014/18/LED/SIL/CW AT3014/18/LED/SIL/WW AT3014/18/LED/WH/CW AT3014/18/LED/WH/WW | 18 |
| AT3014/25/LED/SIL/CW AT3014/25/LED/WH/CW AT3014/25/LED/WH/WW | 25 |
| Working Temp Range (C) | -20 to 45 |
Lamp
| Beam Angle (Deg) | 120 |
|---|---|
| CCT Configuration | Single |
| LED Lifetime (hr) | 36000 |
| This is the Reported LED Lifetime in Hours based on TM-21. Atom does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below. | |
| LED Lifetime Rating | L70B10 |
| This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. This is a LED rating and not a system rating. | |
| LED Type | Diffused |
| Number of Lamps | 1 |
| TM-21 Test Hours (hrs) | 6000 |
Colour temperature
| CCT (K) | |
|---|---|
| AT3014/12/LED/SIL/CW AT3014/12/LED/WH/CW AT3014/18/LED/SIL/CW AT3014/18/LED/WH/CW AT3014/25/LED/SIL/CW AT3014/25/LED/WH/CW | 4000 |
| AT3014/12/LED/WH/WW AT3014/18/LED/SIL/WW AT3014/18/LED/WH/WW AT3014/25/LED/WH/WW | 3000 |
| CCT Colour | |
| AT3014/12/LED/SIL/CW AT3014/12/LED/WH/CW AT3014/18/LED/SIL/CW AT3014/18/LED/SIL/WW AT3014/18/LED/WH/CW AT3014/25/LED/SIL/CW AT3014/25/LED/WH/CW | Cool White |
| AT3014/12/LED/WH/WW AT3014/18/LED/WH/WW AT3014/25/LED/WH/WW | Warm White |
| System Lumens (L) | |
| AT3014/12/LED/SIL/CW | 1225 |
| AT3014/12/LED/WH/CW | 1280 |
| AT3014/12/LED/WH/WW | 1190 |
| AT3014/18/LED/SIL/CW | 1835 |
| AT3014/18/LED/SIL/WW | 1675 |
| AT3014/18/LED/WH/CW | 1800 |
| AT3014/18/LED/WH/WW | 1745 |
| AT3014/25/LED/SIL/CW | 2475 |
| AT3014/25/LED/WH/CW | 2545 |
| AT3014/25/LED/WH/WW | 2355 |
Driver
| Dimmable | Yes |
|---|---|
| Driver Included | Yes |
| Integrated Driver | No |
| Driver Type | Dimmable ( Phase cut) |
| Wiring Type | Re-wireable terminal block (3 pin) |
Energy Savings Scheme
| Ipart Approval | Yes |
|---|---|
| REES Approval | Yes |
| VEU Approval | Yes |
Compliance
| Standards |
|
|---|
Warranty
| Commercial Use Warranty | 3 (Yr) RTB |
|---|---|
| Domestic Use Warranty | 3 (Yr) RTB |
| Operational Lifetime (hr) | 30000 |
| VIP Warranty (Yr) | 2 Onsite, 3 RTB (Total 5 Years) |
| VIP warranty is available to registered users and is subjected to additional terms and conditions. Register as a VIP today. Our standard warranty is return-to-base. Onsite warranty is only available to users who are registered, for sites located in the defined areas/regions and for purchases that have been registered. | |
